Our work is exclusive to the guns and calibers listed within this website.

Finest Barrel Liners Available

The liners manufactured in my shop are made from top quality steel. They are button rifled with a bore that is ultra smooth and uniform with sharp, distinct rifling. The rifling style and rate of twist is patterned after the older Winchester lever action and single shot firearms.

As a barrel specialist, I have developed these liners for relines in my own shop, and have built my shop reputation on customer satisfaction. Your reline job is only as good as the liner installed and from my shop, you will receive the finest liner available.

Gun Barrels Manufactured with my Barrel Liners

If you are a gun manufacturer, you might consider using our barrel liners for your barrel application. Many companies have used our liners making a lightweight barrel by injection molding, carbon wrapping or using a steel or aluminum sleeve that my liner is slipped into. One type of barrel replacement has been for the Ruger 10-22. These barrels have proven to be very accurate. The advantages to using my barrel liner vs. a standard barrel is as follows:

• Cost savings in production time.
• Being able to make an accurate lightweight barrel.
• Achieve better accuracy. The synthetic or aluminum jacket seems to dampen the shooting vibration, allowing the barrel to be very accurate.

Barrel Liner Specifications

 

22 Rimfire Liner Specifications

Outside Diameter – 5/16″ (.311″ – .312″)

Length – Approximately 27″. Allow approximately 3/4″ on each end for trimming.

Twists: 22 L.R. 1-16”, 22 Short 1-20”                  $37.00  22 LR  1-9”   for heavy bullets                              $50.00  These liners are to be used for .22 LR and Short only.   No 22 Mag or 22 Centerfire.       $100 Minimun Order Required

25-20 Liner Specifications

Outside Diameter – Approximately .435″

Length – Approximately 25″                                 $150.00                    over 25″                                                   $230.00  Please give barrel length Groove Diameter – .257″; 1-14″ twist

32-20 Liner Specifications

Outside Diameter – Approximately .505″

Length – Approximately 25″                            $150.00                   over 25″                                            $230.00 Please give barrel length  Groove Diameter – .311″; 1-18″ twist

38-40 & 44-40 Liner Specifications

Outside Diameter – Approximately .590″

Length – Approximately 25″                        $160.00                  over 25″                                         $240.00 Please give barrel length  38-40 Groove Diameter – .400″, 1-25″ twist

44-40 Groove Diameter – .428″, 1-25″ twist

I have limited quantities of Centerfire liners to sell,  therefore, you may want to stock up now if you think you will be needing any for the future.  I will be retaining a quantity of these liners for my own relines. For the longer length Centerfire barrel liners over 25″, please give me your exact barrel length and I will figure for the trim.  I have a limited quantity of these longer lengths in stock.

17 Caliber Rimfire Liner specifications

Outside Diameter – 5/16″ (.311″ – .312″)

Length – Approximately 27″                         $47.00

Groove Diameter – .172″, 1-9″ twist

.17 caliber liners to be used only for the .17 Mach 2

 If you  would like a quote for a 100 liners or more, please e-mail me for a quote.

Payment & Shipping Charges

$100 Minimun Order Required 

Send a check (no Credit Cards) with a note explaining which calibers and lengths you need.   Please include your phone number and address.

 Shipping Handling and Insurance =

$30.00  for 22 RF and 25″ Centerfire liners.

 $35.00 for longer length Centerfire liners